Select a product
VX-1210
  
SYSTEM 600  
VX-4000
  
VX-3200
  

AIRBAND RADIOS

VXA-150
VXA-210  
VXA-300

 
SPECIFICATION
Frequency Range:
RX: 0.5 - 30 MHz
TX: 1.6 - 30 MHz
Number of Channels:
500 Channels
Emission Type:
A1A(CW), J3E(LSB/USB), H3E(AM), F1B(AFSK)
Channel Spacing:
10Hz
Antenna Impedance:
50 Ohms (Unbalanced)
Temperature Range:
—22 F to +140 F (-30C to +60C)
Frequency Stability:
±1.0 ppm
Display Type:
Liquid-Crystal (LCD), with Illumination
Key Controls:
3 Knobs, Power Switch, 3 Programmable keys
Power_Requirements:
DC 14.4 V Lithium-ion Battery
Recharge Time:
5 Hours (Typical)
Current Consumption:
RX: 500 mA (Saver off), 100 mA (Saver on)
TX: 5A(20 W), 3A(5W)
Case size (w/o knobs):
7.6(W) x 2.9(H) x 10.8(D) (193 x 74 x 274 mm)
Weight (approx.):
7.1lbs. (3.2 kg) w/FNB-66Ll Lithium-ion Battery
Transmitter
Power_Output
20W/SW (J3E/A1A/F1 B), 10 W/2.5 W (H3E)
Duty Cycle
25 % Voice
Modulation Type
Balanced Modulator (SSB:J3E)
Early Stage/Low Level (AM:H3E)
Spurious Emission
-56dB or better
Carrier Suppression
55dB
Undesired Sideband Suppression
55dB@ 1.5 kHztone
Audio Response (J3E)
350 2650 Hz (-6 dB)
3rd-order MD
-31dB
Microphone Impedance
2 k Ohms, condenser type
Receiver
Circuit Type
Double Conversion Superheterodyne
Intermediate Frequency
47.055 MHz & 10.7 MHz
Sensitivity
0.25 ~iV (J3E/A1A, 10 dB S/N)
Selectivity
2.4 kHz/5.0 kHz (—6 /—60 dB)
IF Rejection
80 dB
Image Rejection
80 dB
Clarifier Adjustment Range
±200 Hz (J3E/A1 A/Fl B), ±400 Hz (H3E)
Audio Output
At least 1.5 W into 4 Ohms @ 10% THD
Audio Impedance
4 - 32 Ohms
*Measurements made per EIA standard TIAIEIA-603
*Specifications are subject to change without notice or obligation.